Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboraotory. The metallic top provides proper ventilation and has provisions for feeding the species. Material:olypropylene / Stainless Steel
  Adding in line with the existing range, these Animal Cages are provided with a Stainless Steel grill at the bottom of the cage to provide a clean surface for the species to move on. Material: Polypropylene / Stainless Steel
 
  This Ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc Material : Polyurethane
  Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. Also have prominently raised graduations on the outer surface. Pouring a solution is through a tapered spout. Material:Polypropylene
 
  Material : Polypropylene
 
  Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation. Material : Polypropylene
  As the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory appratus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved Material: Polypropylene
 
  Dropping Bottles blown in Low Density Polyethylene which dispense small uniform drops of liquids when pressed lightly. Material: Low Density Polyethylene
  Narrow Mouth Reagent Bottles are available both in Polypropylene and Polyethylene. These bottles are rigid, translucent, have excellent contact clarity and strength and are unbreakable too.The Polypropylene Cap has built in seal ring to make these bottles leakproof. Material : low Density Polyethylene & Polypropylene
 
  Wide Mouth Reagent Bottles are available both in Polypropylene and Polyethylene. These bottles are rigid, translucent, have excellent contact clarity and strength and are unbreakable too.The Polypropylene Cap has built in seal ring to make these bottles leakproof. Material :Low Density Polyethylene & Polypropylene
  This autoclavable bottle, made of Polypropylene, can be used for storing & transfering chemicals and other reagents safe & sound. Material :Polypropylene
 
  This wide mouath autoclavable bottle, made of Polypropylene can be used for storing & shipping chemicals & reagents and also to pur in and take out the reagents. It's biult in depressions on two sides provide excellent grip while holding this bottle. Material : Polypropylene
  This autoclavable bottle, made of polypylene, has thick walls, is rugged & can be used for repeated applications of vaccum. Material : Polypropylene
 
  These Polypropylene Aspirator Bottles are much lighter than glass. These are autoclavalble, dependable & durable and has leakproof spigot screwed to the bottle body which requires only a half turn to open or close. They are used for storing or dispensing distilled water & other laboratory solutions. Material : Polypropylene
  Wash Bottles are made of Low Density Polyethlene which gives these bottles a translucnet & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene tube which can be aimed wherever required. Material : Polyethylene
 
  These Wash Bottles are made of Low Density Polyethlene which gives these bottles a translucnet & unbreakable character.The Distinguish feature that these bottles contain is the biult in delivery tube making it a one-piece Wash Bottles and are graduated on the outer surface. Material : Low Density Polyethylene
  These Polyethlene wash bottles have wide moutn that enables easy filling as well as cleaning. The cap is through the top closure and stem moulded in one piece. Material : Polyethylene
 
  Burette has a transparent acrylic body with a leakproof stopcock fitted with a self lubricating PTFE Plug. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acid or 30% bases. Material: Polymethyl Methacrylate/TPX
  MCT Boxes are moulded in polycarbonate and arc therefore strong as well as autoclavable. One size can hold 64 MCTs of 1.5 ml. & the other can hold 100 MCT's of 0.5 ml. These boxes are designed to work at temperatures ranging from -190°C to +12l"C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control. Material :Polycarbonate
 
  Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190°C to + 121°C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control. Material:Polycarbonate
  Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside. Material : Polypropylene
 
  These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips. Material : Polypropylene
  The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box. Material : Polypropylene
 
  Made of polypropylene, this Pipette Box is designed is such a way that it can hold Pipettes of different lengths. The top of the box screws on the bottom and the height can be adjusted by screwing or unscrewing the top. Material: Polypropylene
  Moulded in Polypropylene, this Staining Box helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -70 C to +70 C. The LDPE plug provides leakproof seal and allows easy liquid drainage. Material : Polypropylene
 
  Magenta Box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent Polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene. This autoclavable box is square in shape giving itself a space saving feature. Material: Polycarbonate /Polypropylene
  These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service. Material: Polypropylene
 
  This autoclavable made of polypropylene are much lighter than glass. These dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purposes. Material : Polypropylene
  These autoclavable Carboys made of Polypropylene are an excellent replacement for glass Carboys and are ussed for storing & dispensing distilled water & other laboarotory solutions. These Carboys are depenable & durable and has leak proof spigot screwed fo the body. Material : Polypropylene
 
  dfg sdfg dg dfgdfg dsfg dfg
  These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples. Material : Polystyrene
 
  Centrifuge tubes with conical bottom are available in two sizes i.e. 15 ml. & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15 ml. & 50 ml. tubes respectively. These tubes are available sterilized as well as non-sterilized. Material: Polypropylene
  Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate These tubes have excellent clarity and are strong enough to be used upto 50,OOOxG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical Material: Polypropylene / Polycarbonate
 
  Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50,OOOxG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4 C. Material :Polypropylene
  Made of Polyproylene, these corrosions free funnel Holders can hold funnels with dia 3" to 6". The extra plate provided cab be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided ato ensure firm grip on Rods having dia 1/2" or 3/8" Material:polypropylene
 
  These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The Measures are clear, have good chemical resistance and have raised graduations for easy Material : Polypropylene
  Made of polypropylene, these Connectors are basically pipe-like structure in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edged prevent leakage & Slippage. Material:Polypropylene
 
  These connectors add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube. Material : Polypropylene
  These four way connectors prove to be an excellent option for achieving leakproof Material : Polypropylene
 
  These L shaped Connectors also add to the range of different connectors committed to provide excellent leakproof tube arrangements. Material : Polypropylene
  This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one. Material : Polypropylene
 
  These containers can be used for collecting a wide range of samples of sputum, urine etc.. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof. Material :Polypropylene
  These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples. Material :Polypropylene
 
  In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination. Material: Polypropylene
  Made of polypropylene, these disposable Containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. sterilized. Material: Polypropylene
 
  Measuring Cylinders, moulded in Polypropylene & TPX, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Material: Polypropylene
  Material : TPX (Poly Methyl Pentene)
 
  Measuring Cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent. Material : Polypropylene
  Adding to the range of round & hexagonal base cylinders are the pentagonal ones. Now offers you a wide range of cylinders with different bases to choose from. Prominently raised graduation & excellent contact clarity are among the other features of these cylinders. Material: Polypropylene
 
  This stand, as the name suggests, is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for 50ml nestler cylinder & other for 100ml. nestler cylinder. Material : Polypropylene
  Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vaccum desiccators can hold vaccum upto 740 mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing. Material: Polystyrene/Polypropylene
 
  Plain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Material :Polystyrene/Polypropylene
  These Polypropylene Petri Dishes are clear, unbreakable & autoclavable Material :Polypropylene
 
  PS Petri Dish with fitting proves excellent for culture exp. Made in polystyrene, this transparent Petri Dish provides excellent inside view. Material :Polypropylene
  These cone shaped Polypropylene Flasks are rigid, translucent & autoclavablw free and makes the flask leakproof. Threads should be disengaged before autoclaving. Material :Polypropylene
 
  Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. Material : Polypropylene
  Moulded in Polyproylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at evey point of Contact. This Flask Stand can hold round bottom Flask up to 10 Ltr. Capacity. This Stackable Flask stand can also be steam autoclaved. Material : Polypropylene
 
  These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved. Material :Polypropylene
  Moulded in Polypropylene, these two piece funnels arc light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has a perforated filter plate. Material :Polypropylene
 
  Designed specifically for analytical chemistry, the body of the funnels is 60 8 Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage. Material: Polypropylene
  Made of Polyproylene, these corrosions free funnel Holders can hold funnels with dia 3" to 6". The extra plate provided cab be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided ato ensure firm grip on Rods having dia 1/2" or 3/8" Material:Polypropylene
 
  This non-corrosive Seperatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of sepearating funnels. Two tapaered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8". Material : Polypropylene
  These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.Material : Polypropylene
 
  Adding to the existing range of Jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle. Material: Polypropylene
  These transparent Specimen Jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These Jars provided excellent protection to the species preserved in it. Material : Polystyrene
 
  Coplin Jar made of Polypropylene can hold 10 slides of the size 1 "x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides. Material:Polypropylene
  Kipp's Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. H2S gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning. Material: High Density Polyethylene
 
  This non-toxic disposable loop is accurate to semi quantitative stand for handling samples. Material: Polystyrene
  These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds. SENIOR SET : This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball. JUNIOR SET : This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box. Material: Polystyrene
 
  This set consists of moulded balls of different colours & sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards. Material : Polystyrene
  These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride. Material : Polyethylene
 
  These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polyethylene bags are sterilized by radiation. Material : Polystyrene
  ELISA/ASSAY plates are made of optically clear, non-toxic Polystyrene. These plates with 96 U Bottom or flat bottom wells bear alpha­numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized. Material:Polystyrene
 
  Plantation Pots, moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose. Material: Polypropylene
  Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used conventionally. Material: Polypropylene
 
  Blown in Polypropylene, this Pot is used for making Leclanche Cell. This Pot too has very good contact clarity & excellent chemical resistance Material: Polypropylene
  This fast release pipetting device is used for precise pipetting and zip qick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collect inside to hold various pipetted of standard sizes. It resists acids & alkalies and cab be easily disassembled for thorough cleaning. Material: Acrylonitrile Butadiene Styrene
 
  This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage. Material : Polypropylene
  This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered. Material : Polypropylene
 
  Moulded in Polypropylene, this unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled. Material : Polypropylene
  This double ended pestle's one end fits 1.5ml. Micro centrifuge tube & the other one fits 0.5ml. Micro centrifuge tube. Material: Polypropylene
 
  This, infact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas. Material: Polypropylene
  This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting. Material :Polypropylene
 
  Twin Purpose Rack for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT's, respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube. Material :Polypropylene
  This rack, as the name suggests, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be stacked together to save shelf space. Material : Polycarbonate / Polypropylene
 
  These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations. Material : Polypropylene
  Cryo Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index. Material : Polycarbonate
 
  These Racks are clear acrylic construction with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation. Material : Polymethyl Methacrylate / Polycarbonate
  This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of 030mm, 020mm, 017mm & 012mm. Material : Polypropylene
 
  Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification. Material : Polycarbonate
  These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks are provided with alpha numeric index for easy sample identification. Racks are stack able even when loaded and have purpose designed label spaces on each side. Material : Polypropylene
 
  Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust. Material: Acrylopitrile Butadiene Styrene / Polycarbonate
  These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand. Material :Polystyrene/Polypropylene
 
  Moulded in Polypropylene, this autoclavable Reagent Reservoir is helpful for multi-channel pipettes to be used into microtiter plates. Material : Polypropylene
  This Universal Reagent Reservoir is a graduated single reagent reservoir with maximum volume of 50ml, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5ml. reagent channels. Made of polypropylene these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pipettes Material : Polypropylene
 
  These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tabulations that accept from 6 mm to 10 mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options i.e. 2 way & 3 way. Material :Polypropylene / PTFE
  This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology. Material: Polystyrene
 
  Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel Material: Polypropylene
  These Slide Boxes are durable, compact & provide utmost protection to I"x3" slides. Heavy walls will not warp, splinter or crack. Boxes arc unaffected by humidity and arc thoroughly insect proof. Material :Polystyrene
 
  Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in three sixes i.e. 1,2 & 5 slides. Material :Polypropylene
  Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside. Material: Acrylonitrile Butadiene Styrene
 
  Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers. Material: Polypropylene
  This sterile, smooth spreader enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium. Material: Polystyrene
 
  Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting Material: Polypropylene
  These Troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc. Material: Polypropylene
 
  These polypropylene tubes provide excellent aption for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim. Material :Polypropylene
  A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material: Polypropylene
 
  These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable Racks can withstand sub-freezing temperatures. Material : Polypropylene
  Material : Polycarbonate
 
  An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops. Material: Polypropylene
  Needless to say, Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting. Material: Polypropylene
 
  Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilixed for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus. Material: Polypropylene
  This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly. Material: Polypropylene
 
  These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents. Material :Polypropylene / Polystyrene
  These polypropylene vials are unique because the cap fitted with an O-ring can be screwed into the vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc. Material : Polypropylene
 
  As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190 C. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudonal grooves which give it a non-twisting character when placed in a vial rack. Material: Polypropylene
  . This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials this vial can also be used for storage purposes at temperatures as low as -190"C. Material: Polypropylene
 
  Another addition to the range of storage vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof storage vial Material: Polypropylene
  These polypropylene vials add to the existing range of storage vials. Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc. Material : Polypropylene
 
  These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count Material : High Density Polyethylene
  Adding to the existing range of Cryo Vials is this vial which has internal thread in it. T|ie cap fitted with an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification. Material: Polypropylene
 
  Cryo vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190 C. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof.
  Cryo vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190 C. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack. Material: Polypropylene
Note :
>>
The rates given above are Indicative only. It may change time to time without any prior notice.
>>
The specifications given indicates general description of the products. We may change the same in case of modification and betterment of the product, without any prior notice.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
© 2006 Aakar Exports. All rights reserved
Website Powered By : VCAN Technologies
SitemapInquire usFeedbackServicesProductsCompanyHomeContact us